Old Water Bottle that you're not using much?

Post by **Hikin_Jim** » Thu Nov 05, 2015 8:34 pm

OK, long shot, but has anybody got an old water bottle laying around with a cap like this?

I broke the cap on a very nice double wall water bottle. I'd like to keep the bottle if I can. The threaded area is about 4 cm outside diameter, and it appears to be about 3 tpi (threads per inch). Thread thickness is about 2 mm. The depth of the threaded area is about 3 cm although anything close would work; it's the outside diameter and thread that matters.

Anyway, if you've got such a bottle with such a cap laying about (and would be willing to part with it), please send me a PM.

HJ

Post by **dima** » Thu Nov 05, 2015 9:37 pm

Klean Kanteen caps have about those specs, except 4tpi, instead of 3tpi. If that's actually what you meant, you can buy replacements for abour $5:

http://www.ebay.com/sch/i.html?_from=R4 ... ap&_sop=15

Post by **Hikin_Jim** » Thu Nov 05, 2015 10:11 pm

Thank you.

It looks like, based on what others have been telling me, that this is a fairly standard thread. Hydroflask appears to have the same threads as well.

I'm going to head to REI this weekend and see if HydroFlask or KleenKanteen's caps fit my bottle.

HJ